- Do the units come with all the necessary pipes?
Yes, the units have all the piping included. They have a flexible waste pipe located underneath the tub which must have an ‘inline trap’ fitted to it by your...
Last Modified: Jul 30, 2009 Number of views: 635
- Hand Shower and other shower outputs let water drip out
If you find that some water is still coming out of the shower outlets (monsoon, hand shower, body jets and foot massager) even...
Last Modified: Feb 21, 2011 Number of views: 418
- My shower is not very powerful
Check to ensure you are supplying enough water pressure to the shower 91-3) bar.
Last Modified: Jul 31, 2009 Number of views: 759
- My Shower leaks
The first thing to do is to locate where exactly the leak is coming from.
Move the shower away from the wall/corner and look both behind back and also under the tub.
Check the grey...
Last Modified: Jul 31, 2009 Number of views: 629
- My Steam Generator is not working
If you are just installing your steam shower and there is no steam being produced:
(If you have a Deluxe model your display may indicate an Error message)
Last Modified: Aug 05, 2009 Number of views: 1230
- Selector icons
This is not a very common issue, but is easily resolved.
The first and simplest solution is to turn the dial to output water...
Last Modified: Jul 30, 2009 Number of views: 633
- Traps
All Bathtek steam shower, whirlpool baths and shower cabins require a waste trap to be fitted.
Traps can be purchased from most good plumbing supply companies.
Some customers have...
Last Modified: Nov 13, 2009 Number of views: 1282
- Water connection at the rear of the shower
The water connections at the rear of the shower originate from the diverter assembly. Connected to that are the two braided Hot...
Last Modified: Jul 30, 2009 Number of views: 664
- Water keep pulsing
If you water keeps pulsing fast and slow or if your pump keeps starting and stopping then you may need to remove the Non Return Valves (NRV's) from the shower.
TO REMOVE THE...
Last Modified: Aug 26, 2009 Number of views: 683
- Water not exiting the waste fast enough
If the water is not leaving the waste fast enough this is because there is not enough 'fall' on the waste assemply.
![]()
Last Modified: Aug 28, 2009 Number of views: 779
- Water pressure requirements
Bathtek showers requires between 1 and 3 bar of pressure at the unit to operate. For optimum results 2-3 bar is recommended. Please note that Bathtek Steam...
Last Modified: Jul 29, 2009 Number of views: 628
- Water Temperature
If your shower is unable to provide hot water, even with the dial set to the hottest setting, this would indicate that the...
Last Modified: Sep 23, 2009 Number of views: 836
