|
Untitled Document
|
|
 |
View Questions By Category: |
 |
|
 |
Assembly (5)
For support relating to the assembly of your steam shower |
|
|
|
|
|
|
| Steam Showers |
| For technical support relating to Steam Showers |
| |
| There were 7 questions found in this category: |
|
|
| |
- Cracks around the steam, pod
It is IMPORTANT that you check and tighten ALL connections and joins when assembling the...
Last Modified: Jul 30, 2009 Number of views: 378
- Door Cams (wheels)
In order for your doors to open and run smoothly they need to be correctly fitted to ensure they are not too tight in the...
Last Modified: Jul 31, 2009 Number of views: 369
- How much does it cost to run the steam function of my shower?
The steam functions cost surprisingly little to run. Based on current costs for electricity to operate the steam function for a recomended maximum of half and hour is around...
Last Modified: Oct 07, 2009 Number of views: 483
- Ozone (o3)
The Ozone device fitted to our steam showers is used to help prevent the build up of mould and mildew which thrive in warm moist places.
Last Modified: Jul 30, 2009 Number of views: 418
- There are 3 chrome knobs on the control panel, what do they all do?
All our units come with 3 control knobs located on the control panel to operate the ‘water’ functions in the unit. The top control is a divertor valve,...
Last Modified: Jul 30, 2009 Number of views: 394
- Using the Steam Function
The steam generator operates between 210-230v. The steam generator has a maximum output capacity of 2.8-3.0kw +/-...
Last Modified: Jul 01, 2010 Number of views: 90
- Waste assembly
Under most of our steam shower tub bases there is approximately 25mm clearance from the waste assembly to the floor. (This height...
Last Modified: Jul 30, 2009 Number of views: 528
|
|
|
|
|
