The Steam Generator operates between 210-230v. The steam generator has a maximum output capacity of 2.8-3.0kw +/- 10% at 230v. Where the voltage to the electronics of the shower is below 230v the steam generator will operate at a lower capacity meaning it may take longer to achieve the desired cabin temperature or fail to reach higher temperature settings. Please also note that many other factors can affect the ability of the steam shower to achieve the desired temperature. The fabric of the shower will absorb some of the temperature produced, the number of occupants, internal volume of the shower, ambient room temperature, power voltage fluctuations, lime scale build up, water type (soft, hard, desalinated). The temperature of the shower is calculated from the temperature probe location which varies depending upon model. Temperature in the shower will be greater nearer the steam pod where temperatures that may scald or burn are achieved. If you prefer to use the steam shower at higher temperature settings, is recommended that you activate the steam function for 10-15 minutes before entering. If you use the steam function from cold, note that the fabric of the shower, the number of occupants, temperature of the ambient air and other factors WILL affect the performance and maximum temperature achievable. |
