question-the-electrical-power-keeps-going-off-on-my-shower

Bathtek Technical Support

Home | Contact us | Submit Questions | Glossary

Untitled Document

Knowledgebase Home >> Steam Showers >> Electrical | Contact

The electrical power keeps going off on my shower

There are a number of reasons your showers electricity by be 'tripping'

1: The shower should be connected via isolated fused spurs. If you are using the 3 pin plug supplied you may find that the power drain on the 'Ring' you are connected to is unable to cope and therefore trips.

2: Check that there are no electrical 'shorts' on any of the cables as these can cause electrical faults.

3: If you have an RCD (Circuit breaker) fitted onto your consumer unit (Mains Board) then remove the one/s fitted to the shower. Having two RCD devices on the same supply can mean that they false trip each other.

Typical RCD as fitted to our steam showers.

Would you like to...

	Print this page
	Email this page
	Post a comment

Export Options

Book Mark Options

	Post page to del.icio.us
	Digg it

	Furl

User Opinions

0%		100%
1 total votes.

How would you rate this answer?

Helpful

Not helpful

Visitor Comments

Comment #1 (Posted by Gareth Hendley)
i seem to have two cables coming from the steam generator box, labelleled connection cable a and connection cable b . they look or they are male and female nine pin arrangements but thjere seems to be nowhere that they connect to. there seems to be no way of connecting power to the main control board. that does have two wires coming out of it one for the telephone and one for labelled 5 core signal? any ideas.