Steam Showers, Shower Cabins, Whirlpool Baths, Bathroom Suites, Waterproof TV, Bathroom Furniture, Shower Towers, Shower Enclosures and Taps.
|
|
****JavaScript based drop down DHTML menu generated by NavStudio. (OpenCube Inc. - http://www.opencube.com)****
|
 |
|
|
|
|
|
|
| |
|
Home Page | Back to Steam Showers
Bathtek 9017R Steam Shower Cabin
The 9017 is low step entry steam shower cabin. The 9017 has all the features you could want in a shower cabin - monsoon rain top shower, hand shower and riser, back jets and of course powerful 3kw steam generator. The unit has roof light, o3, ventilation and built in FM radio too. The back inside walls of the cabin are white acrylic with a fitted shelf and mirror. The image of the item here is the RIGHT handed version, we are also able to offer the 9017L.
CLICK TO VIEW A LARGER IMAGE
 |
Size: 1200mm x 900mm x 2250mm
Price £899.99
Delivery £99.99 (see exceptions)
AVAILABILITY: ORDER ONLY (6 WEEKS APPROX)
Learn about the benefits of Hydrotherapy
|
- Remote Control
- Electronic steam time &
temperature control
- Thermostatic Shower Valve
- Tropical Monsoon Top Shower
- 6 Hydro massage body jets
- Multi function hand shower
- Foot massage attachment
- Built-in FM radio with cd/mp3 input
- Control panel
|
- Telephone answer function
- Extractor Fan
- Toiletries Shelf
- Low voltage ceiling lighting
- Mirror
- Built in seat
- Ozone Sterilization (o3)
- 3kw Steam generator
|
 |
 |
 |
 |
 |
 |
 |
| Click to view larger product feature images. |
Package sizes:
Carton 1: 1200mm x 900mm x 450mm
Carton 2: 1240mm x 240mm x 940mm
Carton 3: TBC
Carton 4: TBC
Measurements are a guide only.
Package dimensions may change without notification.
|
Your Delivery:
Your order will be supplied on a Pallet and arrive on a Tail-lift lorry. The delivery will be taken to your door or as close as is possible within access restrictions (narrow gates etc). You are required to inform us of any access restrictions that may affect deliveries to your delivery location, which would require a smaller delivery vehicle. You are asked to check the goods upon arrival and inform us of any damage within 24 hours.
 |
Installation Notes:
Electrical: This steam shower cabin requires 1 x 13amp electrical supply. It comes with a plug and RCD fitted, however we recommend you remove the plug and have the cabin installed to a fused spur. If you have an RCD fitted within your mains board you may also remove the RCD fitted to the unit.
Water: The cabin requires 1 x hot and 1 x cold water supply. The household water pipes should be fed to a point approximately 1 metre off the floor in the corner where the cabin is to be fitted. Balanced water pressure is required, between 1-3 bar. If using a gravity fed system we recommend you use a pump, to provide the required water pressures. Bathtek do not supply pumps. The steam cabin is a freestanding unit and as such we would recommend your fitter does not fit the unit into locations that mean the cabin cannot be moved away from the wall if needed. The couplings on the cabin to connect to your water supply are standard 15mm compression fittings.
Some of our products arrive in large boxes, please ensure that you have enough room to manoeuvre the boxes and their contents to the installation location. Please also consider the space required to construct the shower cabin needs to be sufficient to enable you to move around the whole unit during its assembly, before sliding into position.
Please also read our helpful FAQ section.
|
|
 |
|
|
|
|
|
|
