Bathtek 9011 Twin Steam Shower & Whirlpool
It does not come much more impressive than the Bathtek Pembrook TV. A Steam Shower Cabin designed for two to share, Two banks of back jets (independant operation) and room in the Whirlpool for two, or just sit and enjoy the swirling soothing whirlpool as you watch the integrated TV. The Pembrook can also be connected to alternative video sources such as DVD or Freeview inputs if you wish. The Bathtek Pembrook also has a mirror, shelves, towel rail and headrests. So whether you’re looking for a Steam Shower cabin with space for two or the idea of an impressive feature is in mind, the Pembrook TV is the one!
NOTE: This item is VERY popular and always sells out before arrival. We recommend ordering in advance to secure your order of this popular Twin Steam Shower.
6 large jet & 4 back jet Whirlpool System
Twin Headrests and twin seats
Remote Control
3kw Steam generator
Electronic steam time &
temperature control
Thermostatic Shower Valve
25cm Tropical Monsoon Top Shower
2 bays of 6 Hydro massage body jets
Multi function hand shower
Foot massage attachment
Built-in FM radio with cd/mp3 input
LCD TV with DVD/VCR connectivity
Extractor Fan
Toiletries Shelf
Low voltage ceiling lighting
LED back lighting
Built in seat
Ozone Sterilization (o3)
Click to view larger product feature images.
Large steam rooms allow the occupant to sit or stand at a comfortable distance from the steam outlet whilst enjoying the steam facilities. In order to offer the same steam facilities but within a smaller shower cabin footprint the location of the steam outlet pod may be close to the occupant. Care must be taken when using the steam function to avoid scalding. Children should NOT use the steam within the product unless under strict adult supervision.
Package sizes:
Carton 1: 1750mm x 120mm x 660mm
Carton 2: 1610mm x 1610mm x 620mm
Carton 3: 1750mm x 120mm x 660mm
Carton 4: 300mm x 210mm x 1740mm
Measurements are a guide only.
Package dimensions may change without notification.
Your Delivery:
Your order will be supplied on a Pallet and arrive on a Tail-lift lorry. The delivery will be taken to your door or as close as is possible within access restrictions (narrow gates etc). You are required to inform us of any access restrictions that may affect deliveries to your delivery location, which would require a smaller delivery vehicle. You are asked to check the goods upon arrival and inform us of any damage within 24 hours.
Installation Notes:
Electrical: This steam shower cabin requires 2 x 13amp electrical supply. It comes with a plug and RCD fitted, however we recommend you remove the plug and have the cabin installed to a fused spur. If you have an RCD fitted within your mains board you may also remove the RCD fitted to the unit.
Water: The cabin requires 1 x hot and 1 x cold water supply. The household water pipes should be fed to a point approximately 1 metre off the floor in the corner where the cabin is to be fitted. Balanced water pressure is required, between 1-3 bar. If using a gravity fed system we recommend you use a pump, to provide the required water pressures. Bathtek do not supply pumps. The steam cabin is a freestanding unit and as such we would recommend your fitter does not fit the unit into locations that mean the cabin cannot be moved away from the wall if needed. The couplings on the cabin to connect to your water supply are standard 15mm compression fittings.
This product arrives in large boxes, please ensure that you have enough room to manoeuvre the boxes and their contents to the installation location. Please also consider the space required to construct the shower cabin needs to be sufficient to enable you to move around the whole unit during its assembly, before sliding into position.
