Home Page | Back to Steam Showers
Bathtek 8008 Steam Shower Cabin & Whirlpool
The 8008 Steam shower with whirlpool is a popular shower cabin. Because of its large interior space, it offers a comfortable sized whirlpool bath, and more than enough room for shower or steam use. Like all Bathtek steam showers, it comes with Monsoon rain shower, foot massager, hand shower and a control panel that enables you to control the lights, radio, steam timer etc. The 8008 is a really impressive cabin offering everything a family could need in their modern bathroom. The back walls of the cabin are darkened mirrored glass and the front walls are gently tinted in a blue/green grey hue.
CLICK TO VIEW A LARGER IMAGE
 |
Size: 1350mm x 1350mm x 2250mm
Price £1399.99
Delivery £129.99 (see exceptions)
AVAILABILITY: IN STOCK
Learn about the benefits of Hydrotherapy
|
- 5 large and 2 back Whirlpool Jets
- Remote Control
- Bath filler Tap
- Electronic steam time &
temperature control
- Thermostatic Shower Valve
- 10” Tropical Monsoon Top Shower
- 6 Hydro massage body jets
- Multi function hand shower
- Foot massage attachment
- Built-in FM radio with cd/mp3 input
|
- Telephone answer function
- Extractor Fan
- Toiletries Shelf
- Low voltage ceiling lighting
- Blue LED back lighting
- Built in seat
- Requires between 1-3 bar
of water pressure.
- Ozone Sterilization (o3)
- 3kw Steam generator
- Pop up waste
|
 |
 |
 |
 |
 |
 |
 |
| Click to view larger product feature images. |
Package sizes:
Carton 1: 1850mm x 160mm x 550mm
Carton 2: 1400mm x 1400mm x 590mm
Carton 3: 1650mm x 60mm x1170mm
Carton 4: 290mm x 310mm x 1640mm
Measurements are a guide only.
Package dimensions may change without notification.
 |
Your Delivery:
Your order will be supplied on a Pallet and arrive on a Tail-lift lorry. The delivery will be taken to your door or as close as is possible within access restrictions (narrow gates etc). You are required to inform us of any access restrictions that may affect deliveries to your delivery location, which would require a smaller delivery vehicle. You are asked to check the goods upon arrival and inform us of any damage within 24 hours.
 |
Installation Notes:
Electrical: This steam shower cabin requires 2 x 13amp electrical supply. It comes with a plugs and RCD fitted, however we recommend you remove the plug and have the cabin installed to a fused spur. If you have an RCD fitted within your mains board you may also remove the RCD fitted to the unit.
Water: The cabin requires 1 x hot and 1 x cold water supply. The household water pipes should be fed to a point approximately 1 metre off the floor in the corner where the cabin is to be fitted. Balanced water pressure is required, between 1-3 bar. If using a gravity fed system we recommend you use a pump, to provide the required water pressures. Bathtek do not supply pumps. The steam cabin is a freestanding unit and as such we would recommend your fitter does not fit the unit into locations that mean the cabin cannot be moved away from the wall if needed. The couplings on the cabin to connect to your water supply are standard 15mm compression fittings.
Some of our products arrive in large boxes, please ensure that you have enough room to manoeuvre the boxes and their contents to the installation location. Please also consider the space required to construct the shower cabin needs to be sufficient to enable you to move around the whole unit during its assembly, before sliding into position.
Please also read our helpful FAQ section.
|
