Home Page | Back to Shower Cabins
Bathtek 8253 Shower Cabins
The Waterbury is an Acrylic backed low step shower cabin. Featuring a 19cm overhead rain shower, six body jets with adjustable nozzles, and hand shower on riser bar. The Waterbury, with its crisp white acrylic will suit almost any bathroom colour and its clean functional design makes it a purchase that will look and last for many years. The shower cabin has 5mm toughened glass walls and doors, with chrome effect handles and a convenient built in seat - ideal for those that may have trouble standing too long in a shower or to appreciate the body jets. Finally the built in mirror and ample storage shelves.
Requirements: Hot and Cold water supply with 15mm compression fittings, balanced 1-3 bar. Location: Free standing. Construction: 5mm acrylic bonded to a steel frame. Glass: 5mm Safety Glass. Frame: Aluminium, silver coloured.
Package sizes:
Carton 1: 930mm x 240mm x 930mm
Carton 2: 430mm x 600mm x 2200mm
Carton 3: 2060mm x 2020mm x 400mm
Measurements are a guide only.
Package dimensions may change without notification.
 |
Your Delivery:
Your order will be supplied on a Pallet and arrive on a Tail-lift lorry. The delivery will be taken to your door or as close as is possible within access restrictions (narrow gates etc). You are required to inform us of any access restrictions that may affect deliveries to your delivery location, which would require a smaller delivery vehicle. You are asked to check the goods upon arrival and inform us of any damage within 24 hours.
 |
Installation Notes:
Water: The cabin requires 1 x hot and 1 x cold water supply. The household water pipes should be fed to a point approximately 1 metre off the floor in the corner where the cabin is to be fitted. Balanced water pressure is required, between 1-3 bar. If using a gravity fed system we recommend you use a pump, to provide the required water pressures. Bathtek do not supply pumps. The steam cabin is a freestanding unit and as such we would recommend your fitter does not fit the unit into locations that mean the cabin cannot be moved away from the wall if needed. The couplings on the cabin to connect to your water supply are standard 15mm compression fittings.
Some of our products arrive in large boxes, the 8253 comes with a one piece back panel (both back walls, please ensure that you have enough room to manoeuvre the boxes and their contents to the installation location. Please also consider the space required to construct the shower cabin needs to be sufficient to enable you to move around the whole unit during its assembly, before sliding into position.
Please also read our helpful FAQ section.
|
