Bathtek B001
Deluxe Sauna, Shower, Steam Room Combination
The Kingston 100 allows you to enjoy the benefits of a traditional Scandinavian wooden sauna, complete with heater and rocks, bucket and ladle, along with timer and lighting in an enclosed one person cabin. Attached to the sauna is a fully equipped steam shower cabin, that features, wet steam, hand shower on riser, back jets and a massive tropical monsoon rain shower. The cabin also comes with built in radio with MP3 connection, soap dispenser and temperature and timer controls via the built in electronic control panel .
Size: 1700mm x 1300mm x 2250mm
Price £2199.99
Delivery: £129.99 (see exceptions)
AVAILABILITY FOR IMMEDIATE DELIVERY:
NOT IN STOCK
AVAILABLE AS LEFT OR RIGHT HANDED (Kingston 100L/Kingston 100R)
CALL TO ORDER ONLY (approx 6 weeks)
|
|
Steam ShowerArea
- 3kw Steam generator
- Electronic steam time & temperature control
- Thermostatic Shower Valve
- Tropical Monsoon Top Shower
- 6 Hydro massage body jets
- Multi function hand shower
- Built-in FM radio with cd/mp3 input
- Extractor Fan
- Built in seat
|
Sauna Room Area
- Sauna Heater & Rocks
- Heater Guard
- Bucket & Laddle
- Integrated seat
- Nordic Pine Construction
- Foot Plate
- Sand Timer
- Thermometer
NOTE: This product is NOT suitable for outdoor use. |
 |
 |
 |
 |
 |
 |
 |
| Click to view larger product feature images. |
Package sizes:
Carton 1: 510mm x 170mm x 2100mm
Carton 2: 1370mm x 40mm x 1770mm
Carton 3: 910mm x 460mm x 2100mm
Carton 4: 1360mm x 210mm x 2100mm
Carton 5: 670mm x 310mm x 360mm
|
Your Delivery:
Your order will be supplied on a Pallet and arrive on a Tail-lift lorry. The delivery will be taken to your door or as close as is possible within access restrictions (narrow gates etc). You are required to inform us of any access restrictions that may affect deliveries to your delivery location, which would require a smaller delivery vehicle. |
Installation Notes:
Electrical: This steam shower cabin requires 2 x 13amp electrical supply. It comes with a plugs and RCDs fitted, however we recommend you remove the plug and have the cabin installed to a fused spur. If you have an RCD fitted within your mains board you may also remove the RCD fitted to the unit.
Water: The cabin requires 1 x hot and 1 x cold water supply. The household water pipes should be fed to a point approximately 1 metre off the floor and at a location behind the shower section of the cabin. Balanced water pressure is required, between 1-3 bar. If using a gravity fed system we recommend you use a pump, to provide the required water pressures. Bathtek do not supply pumps. The steam cabin is a freestanding unit and as such we would recommend your fitter does not fit the unit into locations that mean the cabin cannot be moved away from the wall if needed. The couplings on the cabin to connect to your water supply are standard 15mm compression fittings.
The Sauna requires a 1 x 13a connection to the control box. The control box operates the heater, which inturn heats the sauna rocks. The sauna has temperature sensor and lighting, sand timer, and an electronic timer for your safety.
Some of our products arrive in large boxes, please ensure that you have enough room to manoeuvre the boxes and their contents to the installation location. Please also consider the space required to construct the shower cabin needs to be sufficient to enable you to move around the whole unit during its assembly, before sliding into position.
Please also read our helpful FAQ section.
|
